48
PROGRAMMING MODE - SETUP MODE
17. Rinsing time setup
Entering set up mode.
You will see LqC1
Press the Whites button.
Press the Colors or the Perm.Press button until
Press the START button.
Press the Colors or the Perm.Press button until
Press the START button.
Display previous rinsing time.
Press Colors(+) or Perm.Press(-) button to select rinse cycle.
(Max 15min, Min 8min)
Press the START button.
The machine sets up the rinsing time, then advances to the next process
automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type – Turn on/off toggle switch.
• Card type – Insert the service card.
• OPL type – Push the Whites button twice.
Button
appears in the display.
appears in the display.
Display