58
PROGRAMMING MODE - TEST MODE
2. Factory reset -
After factory reset, machine information is changed to the default value.
Entering set up mode.
You will see LqC1
NOTE
• Washing time
• Rinse cycle
• Top spin speed
• Add SUPER WASH
Press the Warm or the Cold button until
Press the Start button.
Press the Warm button until
Press the Start button, then factory reset is done.
is displayed.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type – Turn on/off toggle switch.
• Card type – Insert the service card.
• OPL type – Push the Hot button twice.
10 minutes
twice
1000 rpm
3 minutes extra wash and one extra rinse
Button
appears in the display.
appears in the display.
Display