Getting Started; Accessory List; Turning Power On And Off; Demonstration Function - Alpine CDE-W265BT Owner's Manual

Getting Started

 CDE-W265BT
/DIM.
/
/SOURCE
Rotary encoder
 CDE-164BT
Rotary encoder
/SETUP
/ENTER

/
/SOURCE

Accessory List

• Head Unit ..................................................................................1
• Power Cable ..............................................................................1
• Microphone ..............................................................................1
• Mounting Sleeve ......................................................................1
*
• Carrying Case ..........................................................................1
• Bracket Key ...............................................................................2
• Screw (M5 × 8) ..........................................................................4
• Owner's Manual..................................................................1 set
* Only for CDE-164BT.

Turning Power On and Off

Press t to turn on the unit.
Note
• The unit can be turned on by pressing any other button except  and
*
e (Release).
* Only for CDE-164BT.
Press and hold t for at least 2 seconds to turn off the
unit.
/SETUP
 /ENTER
/DIM.
Note
• The first time power is turned on, the volume will start from level 0.

Demonstration Function

This unit will enter a demonstration mode to display its various
functions. When Demo mode is set to ON (initial setting), the unit starts
the demonstration if there is no operation for 30 seconds.

Turning the Demonstration mode Off

There are two methods to close the demonstration mode.
Method 1:
When installing this unit in a car for the first time, the DEMO OFF screen
will be displayed for 20 seconds after turning on the unit. Press
ENTER within 20 seconds to put the demonstration mode into
*
STANDBY .
Method 2:
Setting DEMO MODE to STANDBY
* For details about STANDBY and OFF, please refer to "Demonstration"
on page 28.

Source Selection

Press VSOURCE to change the source.
*1
TUNER  SIRIUS XM  DISC  USB AUDIO/iPod
*3 *4
 PANDORA  AUXILIARY
BT AUDIO
*1 Displayed only when a SiriusXM Tuner is connected.
*2 Displayed only when the iPod/iPhone is connected.
*3 Displayed only when BT IN is set to ON, refer to "Setting the
Bluetooth Connection (BT IN)" on page 31.
*4 Not displayed when ALPINE APP is set to OFF, refer to "Setting
the communication mode with a Smartphone (ALPINE APP)"
on page 29.
*5 Refer to "Using the Front AUX Input Terminal" on page 25.
Detaching and Attaching the Front Panel
(Only for CDE-164BT)

Detaching

Notes
• The front panel may become hot in normal usage (especially the
connector terminals on the back of the front panel). This is not a
malfunction.
• To protect the front panel, place it in the supplied carrying case.
• When detaching the front panel, do not apply excessive force as it may
result in malfunction.
* *
or OFF .
*2

*5
 TUNER
9
-EN