Using Jump Memory And Jump Recall Function; Replay Function; Parental Lock Function; Itunes Radio Tagging - Alpine CDE-W265BT Owner's Manual

Notes
• Press k, the information of the selected channels will be displayed.
You can choose the desired channel from the artist name list or song
name list.
Each time you press k, the display changes as below.
Channel Number  Channel Name  Artist Name  Song Name
 Content Info  Channel Number
• When the selected Featured Favorites
channel will tune to channel 000 automatically.
• Press r to return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Using Jump Memory and Jump Recall
function
The Jump feature allows you to store any SiriusXM channel into Jump
Memory. It can be recalled at any time and it then allows you to return to
the previously tuned channel. The most common use is to store one of
the SiriusXM Traffic and Weather channels for your particular market.
This allows you to quickly tune to that channel, hear the traffic and
weather report and then return to your previous channel.
1
While in SiriusXM mode, select your favorite SiriusXM
Channel.
2
Press and hold  for at least 2 seconds.
The channel you selected is stored as the Jump Source.
3
Press and hold OBAND for at least 2 seconds to recall,
and then tune to the saved Jump Source channel.
Notes
• Pressing and holding OBAND again for at least 2 seconds will
jump back to the previous mode or SiriusXM channel.
• During saved Jump Source channel playing, search function, channel
up/down, etc. are not available.

Replay Function

The Replay feature allows you to pause, rewind and replay live SiriusXM
Satellite Radio programming. Operation of the Replay feature can be
found below.
1
While listening to a SiriusXM channel, press  to enter
the Replay mode, which mutes the audio.
The display will show "PAUSED" while in this mode.
The "R" (Instant Replay) indicator lights up.
2
Press  again to resume playback of the stored audio
from the point at which it was paused.
During playback, the SiriusXM Tuner will continue to store the
channel audio until you exit the Replay mode.
During REPLAY playback:
• Fast rewind:
Press and hold .
• Fast forward:
Press and hold .
• Returning to the beginning of the current song:
Press .
• Advancing to the beginning of the next song:
Press .
Note
• If you continue to press Fast forward until the end, the Replay mode is
canceled, and the unit will change to live SiriusXM radio mode.
™
station is not broadcasting, the
3
Press r to cancel the REPLAY mode.
The unit returns to live SiriusXM radio mode.
Note
• Press k, the information of the replaying channels will be displayed.
You can choose the desired channel from the artist name list or song
name list.
Each time you press k, the displayed changes as below.
Band/Channel Number/IR Time  Band/Channel Number/Channel
*
Name  Artist Name
/Song Title
 Clock  Band/Channel Number/IR Time
* If there is no text information, nothing will be displayed.

Parental Lock Function

The Parental Control feature allows you to limit access to any SiriusXM
channels, including those with mature content. For information on
setting the Parental Control passcode, refer to "Setting the Parental
Control" on page 46.
When a locked channel is selected, "CH LOCKED" is displayed, then
press ENTER or turn Rotary encoder, "LOCK CODE?" will be
displayed.
Input the 4-digit passcode you previously selected, and
then press ENTER, refer to "Setting the Parental
Control" on page 46.
The initial default 4–digit passcode is set to 0000.
Notes
• If you input a wrong passcode, "CODE ERROR" is displayed.
• After entering the correct passcode, you can access all locked channels
without entering the passcode again until the unit is powered off and
then back on.

iTunes radio tagging

With iTunes song tagging, you can tag songs you hear while listening to
SiriusXM. The tagging information is saved in your radio until you
connect your iPod or iPhone and then the tagging information is
transferred to your iPod/iPhone. When your iPod/iPhone is connected
to iTunes, you will then be able to preview and purchase the song that
you heard while listening to SiriusXM Satellite Radio. For details, refer
to the Owner's Manual of the Tagging compatible iPod/iPhone.
The m indicator will light when a song playing on a SiriusXM
channel has tag information available.
Information on using the iTunes song tagging feature is described
below:
Press and hold k/Tag for at least 2 seconds to save its
tag information.
During tagging, the m indicator blinks.
If no iPod/iPhone is connected, "TAG COUNTX" is displayed (X is
the total amount of the tag information stored in this unit).
Notes
• During tagging, the iPod/iPhone takes priority to save the tag
information.
• When the memory of iPod/iPhone is full, "iPod FULL" and "TAG
COUNTX" are displayed. The tag information will be stored to the unit.
• If the operation fails, "CANNOT TAG" is displayed.
• This unit can store up to 50 tagged songs. When the memory of the unit
is full, "TAGCOUNT50" and "MEMORY FULL" are displayed.
• When an iPod that doesn't support the tagging function is connected,
"NON-TAGGING IPOD" is displayed.
• When the iPod/iPhone is disconnected from the unit during tagging, its
tag information will be stored in the unit.
* *
 Content info
/Category Name
49
-EN
*