Open Scan (Os) Mode - Uniden UH8050S Owner's Manual

Operation

Open Scan (OS) Mode

All UHF-CB, user-programmed extra RX
channels, Police and Fire & Ambulance
frequencies have been added to the
OS SCAN Memory for convenience. To
add/remove channels from OS SCAN
Memory, refer to p.25.
Allows continuous scanning of all
selected channels. If an active channel
is found, scanning will stop on that
channel. If the received signal ceases,
the unit will wait 3 seconds for the signal
to return, otherwise scanning resumes.
After transmission in scan mode, the
unit will wait 20 seconds for the signal to
return, otherwise scanning resumes.
To deactivate SCAN, press [SCAN].
If SCAN is deactivated while on an active channel, the UH8050S will
stay on that active channel. If no channels are active, the UH8050S will
reinstate the starting channel.
NOTE
OS Mode is indicated by the absence of the GS icon.
NOTE
UNIDEN UH8050S
27
UHF CB Transceiver