Instant Replay; Turning Instant Replay On/Off - Uniden UH8050S Owner's Manual

Operation - Special Features

Instant Replay

The Instant Replay feature automatically records up to 1 minute of received signal(s)
which can be instantly replayed (through the speaker) by pressing [REPLAY].
Instant Replay automatically records receive signal(s) in the following modes;
• CB & Extra RX channel, Police and Fire (& Ambulance) channel mode
• Scan Mode
• Close Call RF Capture mode
Instant Replay does not record when in monitor mode (SQT-0 setting in normal channel
mode).
Press [REPLAY] at anytime to;
1. Playback the most recent received signal.
OR
2. Playback the most recent recorded signal in the replay buffer (if Instant Replay
automatic receive record was turned Off, see Turning Instant Replay On/Off below).
During playback the display shows REPLAY and the number of the currently playing
recording.
After the most recent received signal has been played back, a long confirmation tone
sounds and the radio returns to the previous mode.
During playback older recordings can be accessed by turning the Rotary Channel
Selector to skip forward/back between recordings stored within the 1 minute buffer. The
record number indicates which discrete recording is currently being replayed.
• Received signals shorter than 500ms are not recorded.
• Automatic recording of receive signal(s) is temporarily suspended
during Instant Replay playback.
• Older recordings are automatically overwritten when new recordings
are stored.
NOTE
• Most received communications are short and the 1 minute buffer may
contain several recordings.
• Transmissions (TX) are not recorded.

Turning Instant Replay On/Off

Instant Replay is ON by default. The
automatic record is On.
Press and hold [REPLAY] to turn Instant Replay On/Off. Two beep tones sound.
Turn Instant Replay Off if you want to prevent the current 1 minute of recordings from
being overwritten.
UNIDEN UH8050S
icon displays to indicate Instant Replay
36
UHF CB Transceiver