Table of Contents
Advertisement
Operation
Add/Remove Channels from Memory
1.
Select which Scanning Mode you wish to use on the channel OS or GS
Mode.
OS is indicated by the absence of the GS icon.
NOTE
2 . Select the channel you want to store by pressing ▼or ▲.
3. Press and hold [
4. To remove the channel from Memory, Press and hold [
to remove. M icon disappears.
Open Scan (OS) mode
Open Scan is the default scan mode.
All UHF-CB have been added to the OS SCAN Memory for convenience.
To add/remove channels from OS SCAN Memory, refer to previous
section.
Allows continuous scanning of all selected channels. If an active channel
is found, scanning will stop on that channel. If the received signal
ceases, the unit will wait 2 seconds for the signal to return, otherwise
scanning resumes.
After transmission in scan mode, the scan mode will be cancelled.
UNIDEN UH820
to store.
MENU/MEM]
17
MENU/MEM]
Handheld UHF-CB Transceiver
Advertisement
Table of Contents
