Store A Frequency Found Using Close Call To A Rx Channel - Uniden UH8050S Owner's Manual

Operation - Special Features
Store a Police or Fire frequency to a RX Channel
Select the Police or Fire (& Ambulance) channels group by pressing [POLICE], and
then select a desired frequency by rotating the channel knob.
Or during SCAN, when scan stops on a Police or Fire (& Ambulance) frequency which
you wish to store press [HOLD] to stay on that frequency.
1. Press and hold [MENU]. The lowest available empty RX channel will appear,
alternating with the selected Police and Fire (& Ambulance) frequency.
2. Change the RX channel by turning the Rotary Channel Selector
3. Press and hold [ENTER]. A confirmation tone sounds to indicate the new channel is
programmed.
The RX channel number flashes.
4. If a name is desired press [SCAN] to begin Alpha Tag edit (see manual
programming above).
5. Press and hold [ENTER], or wait for 10sec, to exit programming mode.
Store a frequency found using CLOSE CALL to a
RX Channel
Start Close Call RF Capture feature.
When an active frequency is found which you wish to store press [HOLD] to stay on
that frequency.
1. Press and hold [MENU]. The lowest available empty RX channel will appear,
alternating with the found frequency.
2. Change the RX channel by rotating the channel knob.
3. Press and hold [ENTER]. A confirmation tone sounds to indicate the new channel is
programmed.
The RX channel number flashes.
4. If a name is desired press [SCAN] to begin Alpha Tag edit (see manual
programming above).
5. Press and hold [ENTER], or wait for 10sec, to exit programming mode.
UNIDEN UH8050S
35
UHF CB Transceiver