Programming The Instant Priority Channel; Recalling The Instant Channel; Transmitting - Uniden UH8050S Owner's Manual

Operation
¹ Available frequencies & channels are within 400-520MHz Band only
in 12.5kHz steps.
² Police, Fire & Ambulance reception is unencrypted analogue.
For your reference a list of the available channels, corresponding
NOTE
frequencies and guidelines for their use is printed on p.51 - p.52. For
Australia, Channels 05 and 35 are reserved for Emergency Calls.

Programming the Instant Priority Channel

Turn the Rotary Channel Selector at the base to select
the Priority Channel you prefer.
Press and hold [INST] for 2 seconds to store the
new setting. INST icon appears to designate the
Instant channel.

Recalling the Instant Channel

Momentarily press [INST] to return to
the Instant Channel. Press [INST] again to
return to the previous channel.

Transmitting

The UH8050S transmits only on UHF-CB Channels.
For your reference a list of the available channels, corresponding
frequencies and guidelines for their use and selection is printed on p.51
- p.52. For Australia, Channels 05 and 35 are reserved for Emergency
NOTE
Calls.
Select the desired channel. Press [PTT] on the side of the Heavy Duty MIC and speak
normally into the microphone. Hold it approx. 7cm from your mouth. Release [PTT] to
end the transmission and listen for a reply.
UNIDEN UH8050S
CALL/SELCALL
PTT
20
INST
UHF CB Transceiver