Table of Contents
Advertisement
Operation
Programming the Instant Priority Channel
Turn the Rotary Channel Selector at the base or press
on the optional Remote SPK/MIC to select the Priority Channel
you prefer.
Press and hold [INST] button on the microphone for 3
seconds to store the new setting. INST icon appears.
Recalling the Instant Channel
Momentarily press the [INST] button on the microphone at
any time to return to the Instant Channel.
Transmitting
The UHF CB Radio uses the UHF-CB Channels.
For your reference a list of the available channels, corresponding
frequencies and guidelines for their use and selection is printed on p.31 -
p.33. For Australia, Channels 05 and 35 are reserved for Emergency Calls.
NOTE
Select the desired channel. Press the microphone's [PTT] button and speak normally
into the microphone. Hold it approx. 7cm from your mouth. Release the [PTT] button to
end the transmission and listen for a reply.
Call Function
Press the microphone [CALL] Button. A three second ringing tone
will be transmitted.
You may select from 5 types of tones (see p.26).
Current regulations require calling tones to be restricted to one
transmission per minute. If a second transmission is attempted within
one minute then an error tone will sound.
NOTE
DUAL Watch
Dual watch monitors the current channel and the Instant channel. (See Programming
the Instant Priority Channel above).
Press [DUAL/MON] on the base or press and hold [DCS/CTCSS/DUAL] on the
Remote SPK/MIC. DUAL icon appears and a short tone beep is heard.
To cancel DUAL Watch press [DUAL/MON] on the base or press and hold
[DCS/CTCSS/DUAL] on the Remote SPK/MIC. DUAL icon disappears.
UNIDEN UH5045
PTT
20
CALL
INST
UHF CB Transceiver
Advertisement
Table of Contents
