Install And Charge The Battery - VTech CS6648-3 User Manual

Install and charge the battery

Install the battery
Install the battery as shown below.
NOTES
• Use only supplied battery.
• Charge the battery provided with this
product only in accordance with the
instructions and limitations specified in this
manual.
• If the handset will not be used for a long
time, disconnect and remove the battery to
prevent possible leakage.
THIS SIDE UP
Connect the charger and charge
the battery
Place the handset in the telephone base
or handset charger to charge.
Once you have installed the battery,
the handset LCD display indicates the
battery status (see the table on next
page).
NOTES
• For best performance, keep the handset
in the telephone base or charger when not
in use.
• The battery is fully charged after 11 hours
of continuous charging.
• If you place the handset in the telephone
base or the charger without plugging in
the battery, the screen displays
NO BATTERY.
7