VTech CS6648-3 User Manual page 49

I hear other Disconnect the telephone
calls when base from the telephone
using the wall jack. Plug in a different
telephone. telephone. If you still hear
other calls, the problem is
probably in the wiring or
telephone service. Contact
your telephone service
provider.
I hear noise on Make sure the telephone
the cordless line cord is plugged in
handset and securely.
the keys do not
work.
There is The handset may be out of
interference range. Move it closer to the
during a telephone base.
telephone
If you subscribe to high-
conversation.
speed Internet service (DSL
My calls fade
- digital subscriber line)
out when I
through your telephone
am using
line, you must install a DSL
the cordless
filter between the telephone
handset.
line cord and the telephone
wall jack. The filter
prevents noise and caller
ID problems caused by
DSL interference. Contact
your DSL service provider
for more information about
DSL filters.
Appliances or other
cordless telephones
plugged into the same
circuit as the telephone
base can cause
interference. Try moving
the appliance or telephone
base to another outlet.
The location of your
telephone base can
impact the performance
of your cordless phone.
For better reception,
install the telephone base
in a centralized location
within your home or
office, away from walls
or other obstructions.
In many environments,
elevating the telephone
base improves overall
performance.
The telephone
does not
receive caller
ID or the
telephone
does not show
caller ID during
call waiting.
The display
shows Out of
range or no
pwr at base.
I cannot
hear any
instruction from
the handset
when I try to
record, play or
delete my own
announcement.
The outgoing
announcement
is not clear.
42
Caller ID is a subscription
service. You must
subscribe to this service
from your telephone
service provider for this
feature to work on your
telephone.
Both your and the
caller's telephone service
providers must use
equipment compatible with
the caller ID service.
The caller may not be
calling from an area which
supports caller ID.
The caller ID information
displays after the first or
second ring.
The handset may be out of
range. Move it closer to the
telephone base.
Make sure the power cord
is securely plugged into
the telephone base. Use a
working electrical outlet not
controlled by a wall switch.
The handset does not
have a speakerphone.
When recording, playing
or deleting your own
announcement, the
instructions are announced
through the handset
receiver. Make sure you
place the handset receiver
close to your ear.
When recording the
announcement, make sure
you speak in a normal
tone of voice towards the
microphone of the handset.
Make sure there is no
background noise when
recording.