Play Your Announcement; Delete Your Announcement; Set Number Of Rings - VTech CS6648-3 User Manual

Play your announcement

1. Press MENU when the phone is not
in use.
2. Press or
sys, then press SELECT.
3. Press SELECT again to select
Announcement. The system
announces, "To play, press 2. To
record, press 7."
4. Press 2 to play the current
announcement.
Options during playback:
• Press q/VOLUME or p/VOLUME
on the cordless handset, or q VOL
or VOL p on the telephone base to
adjust the listening volume.
• Press 5 to stop playback.
• Press on the cordless handset to
switch between speakerphone mode
and handset mode.

Delete your announcement

1. Press MENU when the phone is not
in use.
2. Press or
sys, then press SELECT.
3. Press SELECT again to select
Announcement. The system
announces, "To play, press 2. To
record, press 7."
4. Press 3 or DELETE to delete your
recorded announcement. The screen
displays Annc deleted. You hear a
long beep.
NOTE
When your announcement is deleted, calls
are answered with the default announcement.
to scroll to Answering
to scroll to Answering

Set number of rings

You can set the answering system to
answer an incoming call after two, three,
four, five or six rings; or toll saver.
If you choose toll saver, the answering
system answers a call after two rings
if you have new messages, or after
four rings when there are no new
messages. This enables you to check
for new messages and avoid paying
unnecessary long distance charges
when you are calling from outside your
local area.
1. Press MENU when the phone is not
in use.
2. Press or
sys, then press SELECT.
3. Press or
setup, then press SELECT.
4. Press or
then press SELECT.
5. Press or
6 or Toll saver.
6. Press SELECT to save and you hear
a confirmation tone.
NOTE
If you subscribe to voicemail service from
your telephone service provider, see
Answering system and voicemail.
30
to scroll to Answering
to scroll to Ans sys
to scroll to # of rings,
to select 2, 3, 4, 5,