VTech CS6648-3 User Manual
Hide thumbs
Also See for CS6648-3:
- User manual (87 pages) ,
- User manual (58 pages) ,
- User manual (61 pages)
Related Manuals for VTech CS6648-3
Summary of Contents for VTech CS6648-3
- Page 1 CS6648-2 Go to www.vtechcanada.com for support and the latest VTech CS6648-3 product news. CS6649 CS6649-2 CS6649-3 DECT 6.0 cordless telephone User’s manual (Canada version)
-
Page 2: Important Safety
Please review this manual thoroughly to Follow all warnings and instructions ensure proper installation and operation marked on the product. of this innovative and feature rich VTech product. Unplug this product from the wall outlet before cleaning. Do not use For support, shopping, and everything liquid or aerosol cleaners. -
Page 3: Save These Instructions
supply in your home or office, consult • If the product has been dropped your dealer or local power company. and the telephone base and/or handset has been damaged. Do not allow anything to rest on the power cord. Do not install this •... -
Page 4: Precautions For Users Of Implanted Cardiac Pacemakers
About cordless telephones Battery • CAUTION: Use Only Supplied Battery. • Privacy: The same features that make a cordless telephone convenient • Do not dispose of the battery in a fire. create some limitations. Telephone Check with local waste management calls are transmitted between the codes for special disposal instructions. - Page 5 • Nickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe manner. Do not burn or puncture the battery. Like other batteries of this type, if burned or punctured, they could release caustic material which could cause injury.
-
Page 6: Table Of Contents
Table of contents Redial list........... 18 Review a redial list entry ......18 What’s in the box ........1 Dial a redial list entry ........18 Delete a redial list entry .......18 Overview............2 Telephone base overview ......2 Directory ............ 19 Handset overview ..........4 Add a directory entry ........19 Charger overview ..........5 Review a directory entry ......20... - Page 7 Turn the message alert tone on or off ..31 Using your built-in answering system ..32 Message capacity ........32 New message indication ......32 Message playback ........32 Delete all old messages ......33 Remote access ...........33 Set your remote access code .....34 Call screening..........34 Call intercept ..........34 Temporarily turn off the...
-
Page 8: What's In The Box
1 set for CS6648-2/CS6649-2; NOTE 2 sets for CS6648-3/CS66493-3 To purchase a replacement battery or power adapter, visit our website at www.vtechcanada.com or call 1 (800) 267-7377. -
Page 9: Overview
Overview • Press and hold to erase the missed call indicator when the phone is not in use. Telephone base overview • While the phone is ringing, press to silence the base ringer temporarily. • Press to scroll down while in menus and lists. - Page 10 X/DELETE /SPEAKER • Press to delete the playing • Press to make, answer or end a message or playing call. announcement. • During a call, press to switch • While reviewing the redial list, between the corded handset and directory or caller ID log, press to the base speakerphone.
-
Page 11: Handset Overview
Handset overview 5 – • Press and hold to turn on quiet mode, or turn it off. • Press repeatedly to display other dialing options when reviewing a caller ID log entry. 6 – INT • Press to initiate or answer an intercom call, or to transfer a call. -
Page 12: Charger Overview
There are new voicemail 12 – received from your telephone • Press to make or answer a call. service provider. • During a call, press to answer an ANS ON The answering system is incoming call when you receive a turned on. -
Page 13: Handset And Telephone Base Indicators
Connect Handset and telephone base indicators You can choose to connect the telephone base for desktop usage or wall mounting. Handset lights overview NOTES On when the handset speakerphone is in use. • Use only the adapters provided. • Make sure the electrical outlets are not CHARGE On when the handset is controlled by wall switches. -
Page 14: Install And Charge The Battery
Connect the charger and charge Install and charge the battery the battery Place the handset in the telephone base Install the battery or handset charger to charge. Install the battery as shown below. NOTES • Use only supplied battery. • Charge the battery provided with this product only in accordance with the instructions and limitations specified in this... -
Page 15: Before Use
Before use Battery Battery Action indicators status After you install your telephone or power The screen The battery Charge returns following a power outage, the is blank, or has no or without handset will prompt you to set the date displays Put very little interruption... -
Page 16: Operating Range
Configure your telephone Operating range This cordless telephone operates with the maximum power allowed by the Using the telephone base/ Federal Communications Commission handset menu (FCC). Even so, this handset and You can use the telephone base or telephone base can communicate over a cordless handset to change your only a certain distance - which can vary telephone settings. -
Page 17: Set Date And Time
Set date and time 5. Press SELECT to confirm. You hear a confirmation tone. NOTE NOTE Make sure you set the date and time including the year correctly; otherwise the If, in the future, your telephone service answering system does not announce the provider requires you to dial the area code correct day of the week for your recorded when making a local call, or, if you move to... -
Page 18: Telephone Operations
Telephone operations Make a call Using a cordless handset: Telephone base control key panel: Press When you hear a dial tone, dial the number. Using the telephone base: Lift the corded handset, or press SPEAKER. When you hear a dial tone, dial the number. -
Page 19: Answer A Call
Answer a call Volume Using a cordless handset: To adjust the listening volume on a cordless handset: • Press or any of the dialing keys. • During a call, press /VOLUME or /VOLUME. Using the telephone base: To adjust the listening volume at •... -
Page 20: Transfer A Call
Transfer a call Join a call in progress While on an outside call, you can Another handset or the telephone base transfer the call from a cordless handset can join you on an outside call. That to another handset or to the telephone call continues until all parties hang up. -
Page 21: Chain Dialing
To access a number from the It may be necessary to change your telephone service to use this feature. redial list while on a call: Contact your telephone service provide if: Press REDIAL to enter the redial list. • You have both caller ID and call Press , or REDIAL repeatedly to waiting, but as separate service (you... -
Page 22: Multiple Handset Use
Multiple handset use -OR- To end the intercom call at the telephone base, press INT or Intercom /SPEAKER when using the base Use the intercom feature for speakerphone, or place the corded conversations between the telephone handset back to the telephone base. base and a cordless handset, or two Both screens display Intercom cordless handsets. -
Page 23: Answer An Incoming Call During An Intercom Call
3. To end the intercom call at the press ress /SPEAKER, or lift up the telephone base, press INT, or corded handset to answer the call. /SPEAKER when using the base • To end the intercom call without speakerphone, or place the corded answering or canceling the incoming handset back to the telephone base. - Page 24 • If you have two or more handsets, NOTES the telephone base shows • To cancel the intercom call before it is Intercom to. Use the dialing keys answered, press OFF, or INT on your handset. to e e nter a handset number. The •...
-
Page 25: Redial List
Redial list -OR- Lift the corded handset or press Each handset and the telephone base /SPEAKER when the phone is not store the last 10 telephone numbers in use. dialed (up to 30 digits) independently. When there are already 10 entries, the Press REDIAL. -
Page 26: Directory
Directory 4. Use the dialing keys to enter the name. Additional key presses show The directory can store up to 50 entries, other characters of that particular which are shared by all handsets and the key. The first character of each word telephone base. -
Page 27: Review A Directory Entry
Dial a directory entry • Press 0 to add a space (for entering names only). Search for the desired entry in the directory (see Review a directory Review a directory entry entry or Alphabetical search). Entries are sorted alphabetically. To dial the displayed entry on the Press on the cordless handset cordless handset, press... -
Page 28: Delete A Directory Entry
Speed dial While entering names and numbers, you can: You can copy up to nine directory entries • Press DELETE to backspace and into the speed dial locations (0 and 2-9) erase a digit or character. so that you can dial these numbers more quickly. -
Page 29: Dial A Speed Dial Number
Press SELECT. The screen briefly the speed dial entry. shows Copy from DIR... then the Press SELECT again. Then press first entry of the directory. to scroll to Clear SD and then Press to scroll to the desired press SELECT. The screen shows entry. -
Page 30: Caller Id
Caller ID Review a caller ID log entry Press CID on the cordless handset If you subscribe to caller ID service, or on the telephone base when the information about each caller will phone is not in use. appear after the first or second ring. If Press to browse through the you answer a call before the caller’s... -
Page 31: Dial A Caller Id Log Entry
Save a caller ID log entry to the log and store the new number to the directory. directory While reviewing the caller ID log, press When in the caller ID log, press QUIET repeatedly to display different to browser. dialing options for local and long distance When the desired caller ID log entry numbers before dialing or saving the displays, press SELECT. -
Page 32: Sound Settings
Sound settings Press to scroll to Caller ID log, then press SELECT. Press to scroll to Del all Key tone calls, then press SELECT. You can turn the key tone on or off for When the screen shows Delete all?, each handset and the telephone base. -
Page 33: Telephone Base Ringer Volume
Telephone base ringer volume To silence the telephone base ringer: Press VOL or VOL . on the telephone base to adjust the ringer volume when • Press MUTE or CANCEL on the the telephone base is not in use. telephone base and it displays When you set the ringer volume to zero, Quiet mode the base ringer is off. -
Page 34: About The Built-In Answering System And Voicemail Service
About the built-in Voicemail Built-in from answering system and Category answering telephone system voicemail service service Method When you When you For message recording, your telephone to retrieve received new receive new has a built-in answering system, and it messages messages, the messages, also supports voicemail service offered... -
Page 35: Set Your Built-In Answering System
Set your built-in answering Telephone base control key panel: system The answering system can record and store up to 99 messages. Each message can be up to three minutes in length. The total storage capacity for the announcement, messages and memos is approximately 11 minutes. -
Page 36: Voice Language
To turn on or off with the handset: Default announcement Press MENU when the phone is not The telephone is preset with a greeting in use. that answers calls with, “Hello. Please leave a message after the tone.” You Press to scroll to Answering can use this preset announcement, or sys, then press SELECT. -
Page 37: Play Your Announcement
Play your announcement Set number of rings Press MENU when the phone is not You can set the answering system to in use. answer an incoming call after two, three, four, five or six rings; or toll saver. Press to scroll to Answering sys, then press SELECT. -
Page 38: Set Recording Time
Set recording time Turn the message alert tone on or off You can set the recording time allowed for each incoming message. The When the message alert tone is set message length is three minutes to on, and there is at least one new by default. -
Page 39: Using Your Built-In Answering System
Using your built-in answering Message playback system If you have new messages, the telephone plays only the new messages (oldest first). If there are no new Message capacity messages, the telephone plays back all The answering system can record and messages (oldest first). -
Page 40: Delete All Old Messages
To play messages on a cordless To delete all old messages with a handset: handset: Press MENU when the phone is not Press MENU when the phone is not in use. in use. Press SELECT to select Play Press to scroll to Answering messages. -
Page 41: Set Your Remote Access Code
Call screening Command Description If the answering system and call Skip to the next message screening are on, the announcement (during playback). and the incoming message broadcast Record a new at the telephone base while the call is announcement. answered by the answering system. End the call. -
Page 42: Record, Play And Delete Memos
Use the built-in answering Record, play and delete memos system and voicemail Memos are your own recorded messages used as reminders for yourself service or others using the same answering system. You can record your own memos You can use your answering system and using a system handset or the telephone voicemail service together by setting base. -
Page 43: Retrieve Voicemail From Telephone Service
Retrieve voicemail from • Press and hold DELETE on the handset to erase all digits. telephone service • Press and hold PAUSE to enter a Voicemail is a feature available from dialing pause (a P appears). most telephone service providers. It may 3. -
Page 44: Turn Off The New Voicemail Indicators
Website If you have retrieved your voicemail while away from home, and the handset still Use this feature to view the VTech displays the new voicemail indicators, website address. use this feature to turn off the indicators. Press MENU when the handset/ telephone base is not in use. -
Page 45: Expand Your Telephone System
Expand your telephone Screen messages system Ans sys The answering system is You can add new handsets (CS6609, turned off and will not answer calls. purchased separately) to your telephone system. Your telephone base supports a Ans sys on The answering system is maximum of five handsets. - Page 46 The handset has lost Incoming out of range There is a call coming in. connection to the call telephone base. no pwr at Intercom The system device is on base an intercom call. outside call You are on the Intercom The intercom call has just external call during ended...
-
Page 47: General Product Care
General product care Saved Your selection has been saved. Taking care of your telephone Speaker The speakerphone is Your cordless telephone contains in use. sophisticated electronic parts, so it must Screen display on to register be treated with care. a non-registered handset. -
Page 48: Frequently Asked Questions
Frequently asked The display The handset is deregistered shows To from the telephone base. To questions register HS register it back: and See Below are the questions most frequently Press and hold manual FIND HANDSET on asked about the cordless telephone. alternately. - Page 49 I hear other Disconnect the telephone The telephone Caller ID is a subscription calls when base from the telephone does not service. You must using the wall jack. Plug in a different receive caller subscribe to this service telephone. telephone. If you still hear ID or the from your telephone other calls, the problem is...
- Page 50 The answering Make sure the answering The answering Make sure you enter the system does system is on. When the system does correct remote access not record answering system is on, not respond code. messages. ANS ON should display to remote Make sure you are on the handset and the commands.
-
Page 51: The Rbrc ® Seal
FCC, ACTA and IC regulations The RBRC seal on the nickel-metal ® hydride battery indicates that VTech FCC Part 15 Communications, Inc. is voluntarily This equipment has been tested and participating in an industry program to found to comply with the requirements... - Page 52 may not cause harmful interference, plug is provided with this product. It is and (2) this device must accept designed to be connected to a compatible any interference received, including modular jack that is also compliant. An interference that may cause undesired RJ11 jack should normally be used for operation.
- Page 53 as soon as possible. You will be given REN is an indication of the maximum the opportunity to correct the problem number of devices allowed to be and the telephone service provider connected to a telephone interface. The is required to inform you of your right termination on an interface may consist to file a complaint with the FCC.
-
Page 54: Limited Warranty
Limited warranty Product extends for ONE (1) YEAR from the date of purchase. If VTech repairs or What does this limited warranty replaces a Materially Defective Product cover? under the terms of this limited warranty, this limited warranty also applies to... - Page 55 Products that are not covered the above limitation may not apply to by this limited warranty. you. In no event shall VTech be liable for any indirect, special, incidental, What must you return with the consequential, or similar damages...
-
Page 56: Technical Specifications
Technical specifications not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not Frequency Crystal controlled PLL control synthesizer apply to you. Transmit Handset: Please retain your original sales frequency 1921.536-1928.448 MHz receipt as proof of purchase. - Page 57 And your life. VTech Technologies Canada Ltd. A member of THE VTECH GROUP OF COMPANIES. VTech is a registered trademark of VTech Holdings Limited. Specifications are subject to change without notice. © 2014 VTech Technologies Canada Ltd. All rights reserved. 12/14. CS6649-X_CA_WEBCIB_V4.0...