Scan
DELETING A NUISANCE CHANNEL
If a channel continually generates unwanted calls
or noise (a "nuisance" channel), use the Scan
button to temporarily delete the channel from the
scan list:
1 While the radio is on the nuisance channel, hold
down the Scan button until you hear a tone.
2 Release the Scan button. The nuisance channel
is deleted.
Note:
Restoring a Channel Back to the Scan List
To restore a previously deleted channel back
to the scan list, restart the scan operation or
turn your radio off and on again.
18
English
You cannot delete a priority channel
or the last remaining channel in a
scan list.
SCAN CHANNEL DISCOVERY ALERT
This feature enables you to identify the last
channel monitored before scanning was
stopped. To identify the last channel
monitored, turn the Channel Selector knob
until you hear an alert tone.