Adjusting The Volume; Selecting A Radio Channel; Sending A Call; Receiving A Call - Motorola PR860 User Manual

Getting Started

ADJUSTING THE VOLUME

1 Hold down the Volume Set or Monitor
button
continuous tone.
2 Turn the On/Off/Volume Control knob to the
desired volume level.
3 Release the Volume Set or Monitor button.

SELECTING A RADIO CHANNEL

Your radio offers either 4 or 16 channels.
Note: Due to government regulations, some
To select a channel, turn the Channel
Selector knob clockwise or counterclockwise
until you reach the desired channel.
14
English
(see page 6); you will hear a
channels may not be programmed.
Ask your dealer for more information.

SENDING A CALL

1 Turn your radio on.
2 Use the Channel Selector knob to select the
desired channel.
3 Hold the radio in a vertical
position, press the PTT button,
and talk at a distance of about
1 to 2 inches (2.5 to 5 cm)
from the microphone.
4 Release the PTT button to listen.

RECEIVING A CALL

1 Turn your radio on.
2 Adjust the radio's volume (see page 14).
3 Switch to the desired channel.
4 If at any time a call comes through, you will
hear the call at the volume level you have set.