Scan; Starting Or Stopping Scan; Scanning A Priority Channel; Talkback - Motorola PR860 User Manual

SCAN

You can monitor multiple channels and receive
any calls that are transmitted on them.
Depending on your radio model, either four or
sixteen different channels can be programmed
into each scan list by the dealer. Your radio will
automatically switch to a scan list channel
when it detects activity on it.
Note: The same channels can be assigned to
different scan lists.

STARTING OR STOPPING SCAN

The LED indicator blinks green during a scan
operation, and stops blinking when the radio
switches to a channel.
To start or stop a scanning, press the
preprogrammed Scan button (see page 6).

Scanning a Priority Channel

You may want to check the activity on one
channel more frequently than others. Your
dealer is able to prioritize channels for you.
For example:
Priority Channel Scanning Sequence
→
None specified Ch1 Ch2
→
Ch4 ...Ch1
→
Channel 2 Ch2 Ch1
→
Ch2 Ch4
Note: Even if there is activity on a non-priority
channel, your radio will automatically
switch to an active priority channel, and
indicate the activity with a short tone.

TALKBACK

While your radio is scanning, Talkback allows
you to participate in a call in progress. You must
press the PTT button to participate in the call;
otherwise, scanning continues to the next
channel.
Scan
→ →
Ch3
→ → →
Ch2 Ch3
→ →
Ch2 ...Ch1
17
English