Sharp Aquos LC-45GD6U Operation Manual page 68

Useful adjustment settings
DVI input signal setting
Press
./T
to select" Input Select", and then
press ENTER.
Press .....
/~
to select "Option".
Press MENU and the MENU screen displays.
Press INPUT to select INPUT5.
POWER
o
I%lVirtIJaJ
@§J§@>
MENU
o~e
I I
Press INPUT again to select the input source.
• An image from the selected source
automatically displays.
• You can also select the input source by
pressing
./~.
• If the corresponding input is not plugged in,
you cannot change the input. Be sure to
connect the equipment beforehand.
Display
Jf
-VOl+
VCHA
INPUT
CIJ:) CIJ:)
€)
I
Press MENU and the MENU screen displays.
Press .....
/~
to select "Option".
INPUT button
Press INPUT.
• A list of selectable sources appears.
Selecting input signal type
For setting the signal type of external equipment
connected to INPUT 1 and Input 2 terminals.
Selecting input source
Use this menu to select the input source.
Press
./T
to select "Input Select", and then
press ENTER.
Press
./T
to select a signal type you want
to set, and then press ENTER.
• If the selected signal type is incorrect, images
are not displayed or displayed without any
color.
• If you set INPUT1 and INPUT2 to Auto, the TV will
automatically select the input signal.
• Check the operation manual of the external equipment
for the signal type.
• Setting INPUT 1 and INPUT 2 signal selection to "Auto"
when other equipment is connected will result in the
following connectivity priority.
Press
./T
to select the equipment
connected to INPUT 5 terminal, and then
press ENTER.
1. COMPONENT VIDEO
2. VIDEO
@-67