Sharp Aquos LC-45GD6U Operation Manual page 27

Watching TV
• Turn on the POWER.
• Check that the CableCARD upgrade screen is
n?t displayed. If it is displayed, wait until it
disappears.
• Disconnect the cable antenna.
Disconnecting the cable antenna
®
Press down the
stopper and
remove the
CableCARO.
• Make sure the sample card is inserted whenever the
CableCARD is not in use.
• When you press the eject button, receive the card with
your left hand so as not to drop the card.
CD
Press the eject
button and the
CableCARO will
pop out.
• How to remove the CableCARD
• Turn on the POWER.
• Check that the CableCARD upgrade screen is
not displayed. If it is displayed, wait until it
disappears.
• Remove the cableCARD.
• If there is a white triangle at the right side of
the screen, the screen is not showing the entire
message. Press
./~
on your remote control
to display the rest of the message.
• When there is a
lILINK" button on the screen
there is a link to the next page. Press ENTER
to go to the next page.
A message will appear on the screen. Call
the number on the screen and tell the
operator the CableCARO 10 and Host 10
numbers displayed on the screen.
Removing CableCARD
(@-26