Sharp Aquos LC-45GD6U Operation Manual page 60

Using external equipment
Press .. to select "Cancel Connection" and
press ENTER.
• Operation of the D-VHS deck from the TV is
disabled.
Press
./T I .....
/~
to select "Model", and
press ENTER.
• Selection screen appears.
Press i.LINK to display the i.LINK control
panel.
• When there is no D-VHS deck connected, "No i.LINK
model is available" appears. Please connect one.
(See page 57.)
• When there is no D-VHS deck selected, the selection
screen appears. Please go to step 3.
• By disabling the TV's operation of a D-VHS deck,
the deck can be operated from another i.LINK
device.
• 00:00:00
STOP
lQ§)
O·VHS
Press
./T
to select a device, and then press
ENTER.
• The control panel for the D-VHS deck appears.
Press
.1..
I ..... /~
to select "Model", and
press ENTER.
• Selection screen appears.
Press LLINK to display the i.LINK control
panel.
• Devices that cannot be used with this TV will not appear
in the selection screen.
• When an item in the selection screen is grayed out, the
item is not recognized by the TV and cannot be selected.
(The item may not be connected properly.)
• When there is no D-VHS deck connected, the
message "No i.LINK model is available" appears. In
this case, please connect a D-VHS deck. (See page
57.)
• When there is no D-VHS deck selected, the selection
screen appears. In this case, please go to step 3.
• In order to control a 0-VHS deck from the TV, you
must first choose the D-VHS deck to be controlled.
• One D-VHS deck can be chosen from up to 16 i.LINK
connected decks.
• All D-VHS decks connected with i.LINK cables
should automatically appear in the selection screen.
(Q§) -59