Sharp Aquos LC-45GD6U Operation Manual page 21

Watching TV
POWER indicator
J
Display
- VOL
+
v
CH A INPUT
CLIJ CLIJ 0
i
A
POWER
Plug in the AC cord of the TV. (See page 10.)
• The TV enters standby mode or turns on depending on its
status at the time the power was shut down.
When the TV is standby mode: Press POWER on
the Display or TV POWER on the remote control to
turn on the power.
• To go to standby mode when the TV is on, press POWER on
the Display or TV POWER on the remote control.
• To turn off the power completely, remove the AC cord from the
power outlet when the TV is in standby mode.
POWER SLEEP CARD
_ _ _ _ 0 _ _ 0 __
0_,_ _ 0 _ _ 0
~
TV POWER
TV VCR AUDIO
0 0 0
CBUSAT DVD FUNCTION
0 0
0
SOURCE
LIGHT
S
8 @)
B 0
(3
REC
m
(!) GO
Display status indicator
liltml
• The initial setup starts when the TV powers on for the first time. If the TV
has been turned on before, the EZ setup will not be invoked. See page
28 to try EZ setup from the Setup menu.
• If you are not going to use this TV for a long period of time, be sure to
remove the AC cord from the power outlet.
[llmEll
Please do not unplug the AC cord when the POWER indicator
is red.
ON
Lighting (Blue) Lighting (Blue)
@-20
Standby
OFF (Standby)
CableCARD is downloading data.
Lights off Lights off
Lighting (Red)