Sharp Aquos LC-45GD6U Operation Manual page 26

Watching TV
Digital Cable Module is called CableCARDTM. By attaching the CableCARD, you can receive various digital
services provided by your Cable Company. To obtain and use a CableCARD you need to first submit an
application. Please contact your cable company to discuss receiving an application.
• If your cable company does not have CableCARO available, you must connect to the cable-TV set-top box via component
video or OVI in order to receive HOTV programs. (See page 54.)
• When you change your address (See page 92)
• About EAS(Emergency Alert System) (See page 92)
• How to insert the CableCARD
CD
Press down the
stopper as shown
on the right.
®
Remove the
sample card as
you press down
the stopper.
Sample card
• The words "Pairing Information" may be
replaced by a different expression depending
on the manufacturer of the CableCARO.
Press
~/~
to select "Digital Setup",
./T
to
select "CableCARD MENU",
./T
to select
II
Pair in gin for mat ion", and the n pre ss
ENTER.
Press MENU and the MENU screen display.
@
Insert the
CableCARD slowly
as you press down
the stopper and
release the
stopper when you
have finished.
• If the above procedure does not work,
please follow the following steps instead.
Select "Cable" from "Air/Cable" in Channel
setup mode. (See page 29)
Insert the CableCARD (upper side facing up)
into the CableCARD slot.
• A message will appear on the screen. (It might
take a couple of minutes before the message
appears.) Call the number on the screen and
tell the operator the CableCARO 10 and Host
10 numbers displayed on the screen.
Connect the antenna cable to DIGITAL IN.
Turn on the POWER.
• Do not insert any PCMCIA card other than CableCARO
into the CableCARO slot.
• Please do not pull the AC cord out while the CableCARO
is inserted.
• After inserting the CableCARO, it may take several minutes
before video output from the selected channel appears
on screen.
@-25