LG WM3250HRA Owner's Manual page 36

36 SPECIFiCATiONS
Problem
Power is not turned on
The door does not open
when the cycle _uses or
finishes
The wash cycle time is
longer man usual
It is musty or moldy in me
tub
• Is the power cord piugged in properly?
• Has a house fuse blown, a circuit breaker
tripped, or a power outage occurred?
• Is the temperature in the tub too high?
° Is the water level in the washer high?
, Is the washing machine overloaded? Are other
options added to the wash cycle?
• Has the incorrect detergent been used?
° Did you clean the tub periodically?
• Make sure that the plug is secured in a
grounded 3-prong, 120 V (60 Hzt outlet.
° Reset the circuit breaker or replace the fuse
Do not increase the fuse capacity, if the
problem is a circuit overload, have it corrected
by a quaiified electrician,
- The washing machine has a safety lock built
into the door to prevent burning. Leave the
door closed and wait until the door lock icon
disappears from the display.
• Allow the washer to complete the
programmed cycle, or run the DRAIN & SPIN
cycle to drain the water.
• This is normal The washing machine
automaticaiiy adjusts the cycle time for the
amount of laundry, water pressure, water
temperature, and other operating conditions
• Use only HE (High-Efficiency) detergent
recommended for a front-loading washing
machine.
• See page 29, clean the inside and outside of
the washing machine periodically.
SPECIFICATIONS
Mc_lei WM3250H_A
Electrical requirements !20 VAC @ 60 Hz.
Max. water pressure 14.5- 116 PSi (100- 800 kPa)
Dimensions 686 cm (W} X 75.6 cm (D) X 983 cm (H), 129.5 cm (D with door open)
27 °(W) X 29s/4' (D)X 38_/6 " (H), 51 ° (D with door open}
Net weight
Max. spin speed 1200 RPM