LG WM3250HRA Owner's Manual page 13

_NSTAL, L_TION _NSTRUC]"iONS 13
Unpacking and Removing Shipping Bolts 1
When removing the washer from the carton base, be sure to
remove the foam drum support in the middle of the carton
base
If you must _aythe washer down to remove the base
packaging materials, always _ayit carefully on its side
Do not lay the washer on its front or back.
Remove the bottom two shipping boits with the wrench
(inciuded). Fuii7 loosen aHfour shipping bolts by turning
them counterclockwise and then pull them out
Shipping
boll
Foam Tub Carton Base
Support
2
Locate the four hole caps included in the accessor7 pack
and install them in the shipping bolt ho_es.
Cap 'x. !
NOTE ..................................................................
• Save the bolt assemblies for future use_ To prevent
damage to internal components, Do not transport the
washer without reinstalling the shipping bolts.
• Failure to remove shipping bolts and retainers may
cause severe vibration and noise, which can tead to
permanent damage to the washer. The cord is secured
to the back of the washer with a shipping bolt to heip