Removing Handles And Re-Installing For Right/Left Handed Configuration - Westinghouse RTS Series Installation And Operational Manual

3) Screw the included strike plate into the doorjamb.

2.3 Removing handles and re-installing for Right/Left handed configuration

1) Remove Bag "B" from the Box. The RTS is a non-handed lock, meaning that it can
be installed on either a right handed or left handed door. Use the following steps to
install the handles:
2) Insert outside unit‟s handle onto the
front of the lock based on your right/left
handed configuration.
3) Turn the outside unit over, insert the
handle screw into the spindle hole.
Page 9