Westinghouse RTS Series Installation And Operational Manual page 15

6) Push the excess cable and
wires into the hole under the fixing
plate.
7) Affix lock to the door with the
three screws that match the
thickness of the door See note in
beginning of Section 4.
The longer screw is for the top
fixing post.
The two shorter screws are for the
bottom fixing posts.
8) Place inside unit onto door.
Note: Be sure the spring does not
fall out when unit is placed onto
the spindle.
9) Outside unit should be
completely flush on the face of
the door.
Page 15