Setup Days - Westinghouse RTS Series Installation And Operational Manual

Tip: There are 2 ways to cancel TUM. The above method will void ALL data fields in the
TUM menu and is recommended for a complete reset. Individual day resets may be
carried out in their respective sub menu and are detailed in the relevant sections below.

7.9.3 Setup Days

Most businesses will operate the Timed TUM mode during business days (e.g. Monday
to Friday, 08:00 to 17:00 and Saturday from 09:00 to 12:00). To create TUM settings
for this type operation, it is recommended to set TUM times in the "ALL" (days) menu
and then edit individual days in which TUM should not be armed.
Please read the Important Tips below before setting the time fields.
 On initial setup, the system will display "dashes" (-- : --) in all fields
 Pressing M will highlight the first "- -" field. Using the Up/Down arrow keys will
insert your desired time.
 Pressing M will highlight the next "- -". Use the Up/Down arrow keys to enter a
time. Repeat this procedure for the remaining fields. If a time is not inserted and
M is pressed again, ALL data fields will revert to "- -". You will be prompted to
save this entry and start again. This is an intentional design and is the second
way to cancel/void TUM for a particular day.
 Once all time fields have been entered, pressing M when the "ARM?" icon has
been highlighted will change the text to "ARMED!" and the system will
automatically return to the previous menu.
unless you intend to change a data
the "ARM?" prompt will appear again. Press E to exit and all previous data will be
retained.
"Thank you!" is shown momentarily
indicating that all TUM settings have
been deleted.
Do not go back to the previous menu
field. If you go back into the previous menu,
Page 44