Westinghouse RTS Series Installation And Operational Manual page 58

Note: Since no fingerprints have been enrolled for this User ID; 1N, 2N, 3N will be
displayed. A total of 3 fingerprints may be enrolled for each User ID.
3) When "ID:" is displayed, enter a
numerical value and then press
"#".
Note: Selection must be made
within 5 seconds.
After pressing "#" key, the
following screen will be displayed:
Note that ID:1 is now being
displayed.
4) When "Add FP" is highlighted,
press M.
5) "Add FP" is displayed along
with "1N2N3N". "1N" is
highlighted. Place finger on the
sensor. Press M.
Page 58