1. Welcome Menu –
Westinghouse Logo
No Master
2. Set Date/Time –
Menu Buttons
M - The M button stands for Menu and is used to activate the
menu, select menu options and to save changes.
Up and Down Arrow – These buttons are used to scroll through
menu options.
E - The E button stands for Exit and is used to exit individual
menu options. (Exception: When setting date ranges for Access
Control, E is used to initiate the "Save" prompt).
Press M to access the Welcome Menu. The Unit will then display the screens shown below.
With "Lock Setup" highlighted, press M. The lock will show the Date/Time Screen.
Welcome/Version
Lock Setup
RTS Setup Guide
Date/Time/ID/Voltage
Note that the Start-up screen will
be displayed for about 5 seconds.
None of the buttons will be active
during this time. The Lock Setup
menu will only display the first 4
choices. Press Down Arrow for
choices 5 and 6.
Use the arrow keys to select values
for Month, Day, Year, Hour, Minute
and Second. Press M after each
selection to save that value and
move to the next item.