Epson SC-T7200 Series User Manual page 195

SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Product
Roll Paper Belt
Hard Disk Unit
Auto Take-up Reel Unit
Attachment for Auto Take-up Reel
Unit
MFP Scanner
MFP Scanner stand 44"
MFP Scanner stand 36"
™
Adobe® PostScript® 3 Expansion
Unit
Stand(24")
Appendix
Part number Explanation
C12C890121 This holder keeps roll paper from unrolling after it is removed from the
printer.
"Removing Roll paper or Roll 1" on page 34
U
C12C848031
Use U "Saving to and Reprinting on the Optional Hard Disk Unit" on
page 67
C12C815321 Cannot be connected to models other than the SC-T7200 Series.
Be sure to use with the auto take-up reel unit attachment. The auto
take-up reel unit can not be connected to the printer without the
attachment.
See the documentation supplied with the auto take-up reel unit for
information on installation.
Use U "Using the Auto Take-up Reel Unit (SC-T7200 Series Only)" on
page 51
C12C815411 Cannot be connected to models other than the SC-T7200 Series. This
item is required when installing the auto take-up reel unit.
C12C891071 Can scan and copy documents up to 914 × 2,438 mm. When used with
the optional hard disk unit or Adobe PostScript 3 Expansion Unit, it can
save scanned data, send it by e-mail, and transfer it to shared folders.
C12C844161 This dedicated stand is used to connect the MFP Scanner to the top of
the printer. Select the width in accordance with a model you are using.
C12C844151
C12C891131 This unit allows you to use the printer as a PostScript printer.
For information on using the unit, see the documentation supplied
with the Adobe PostScript 3 Expansion Unit.
C12C844171 For the SC-T3200 Series only. See the Setup Guide for assembly
instructions.
195