Epson SC-T7200 Series User Manual page 150

SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
HP-GL/2 Settings
Item
Quality
Output Size
Using the Control Panel Menu
Description
Speed Choose Print Quality in view of image quality and print speed.
*
Fine
* The hard clip area of the PS command of the data becomes the base
Auto
output size. The actual output size depends on the Margin Options
setting.
When the data does not contain a PS command, the smallest rectangle
area
the base output size.
A Series/US-ANSI/ Choose the base output size from the compatible standard sizes. The
US-ARCH/B Series/ actual output size depends on the Margin Options setting.
Photo Series/
For a cut sheet, this setting is available only when the data does not
Others
contain a PS command.
If the data contains a command, this setting is not available, and the hard
clip area of the PS command becomes the base output size.
User Defined Select this option when outputting at non-standard sizes. After selecting
this setting, set Paper Width and Paper Height. You can set in 0.1 mm
increments.
Paper Width
SC-T7200 Series/SC-T7200D Series: 89
SC-T5200 Series/SC-T5200D Series: 89
SC-T3200 Series: 89
Paper Height
127 to 4,620 mm
The actual output size depends on the Margin Options setting.
*1. The smallest size supported by the printer is 254 mm wide × 127 mm
long. If a smaller size is entered for this setting, the document will print
with wider-than-expected margins, which must be trimmed.
of in the following illustration including the print object becomes
*1
to 610 mm
150
*1
to 1,118 mm
*1
to 914 mm