SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Item
Margin Options
Using the Control Panel Menu
Description
*
The position at which the margin is added depends on the Output Size
Standard
setting, as shown below.
❏
When set to Auto
Adds the value selected for Margin (area of
illustration) outside the hard clip area of the PS command of the data
(area of
❏
When set to a standard size or User Defined
Adds the value selected for Margin (area of
illustration) inside the size selected for Output Size (area of
following illustration) and prints only the section within the area
excluding the margins.
in the following illustration).
152
in the following
in the following
in the