Quick Reference Maintenance Guide - Quadra-Fire YOSEMITE-MBK Owner's Manual

Yosemite Wood Stove
F. Quick Reference Maintenance Guide
CAUTION!
Allow the appliance to completely cool
down before performing any cleaning or maintenance.
Baffl e & Blanket
Optional Blower
Chimney System
Firebrick & Ash Removal
Door & Glass Assemblies
Latch Cam
Spacing Washers
Note: These are generic drawings and may not represent your specifi c model.
Page 34
Baffle
Door Handle
Start the fi rst inspection after the fi rst 2 months of use,
or if performance changes, and adjust your schedule
accordingly. Maintenance is required for safe operation
and must be performed to maintain your warranty.
Frequency
Baffl e & Blanket placement is critical to heat
MONTHLY
output, effi ciency and overall life of the unit.
or
Make sure the baffl e is pushed all of the way
After Every
to the back of the fi rebox. Inspect baffl e for
Cord of Wood
cracks.
Vacuum the blower impellers.
YEARLY
or
After Every
4 Cords of
Wood
The chimney and chimney cap must be inspect-
EVERY 2
ed for soot and creosote every two months
MONTHS
during the burn season or more frequency if
or
chimney exceeds or is under 14-16 ft. (4.3m-
After Every
4.8m) measured from bottom of appliance.
4 Cords of
Wood
This will prevent pipe blockage, poor draft, and
chimney fi res.
Always burn dry wood to help prevent cap
blockage and creosote build-up.
Ashes must be cool before you can dispose of
WEEKLY
the ashes in a non-combustible container.
or
Firebrick is designed to protect your fi rebox.
After Every
After ashes are removed, inspect the fi rebrick
25 Loads of
and replace fi rebricks that are crumbling,
Wood
cracked or broken.
Keep door and glass gasket in good shape to
WEEKLY
maintain good burn times on a low burn setting.
or To test: place a dollar bill between the stove and
door and then shut the door. If you can pull the
After Every
dollar out, remove one washer from door handle
25 Loads of
behind latch cam and try again. If you can still
Wood
pull it out, replace the door gasket.
Check the glass frame for loose screws to pre-
vent air leakage. Check glass for cracks.
Check the door latch for proper adjustment.
WEEKLY
This is very important especially after the door
or
rope has formed to the stove face.
After Every 25
Loads of Wood Check door handle for smooth cam operation.
7004-187L
Task
October 13, 2015
R