Sd Vflash Media Card; Replacing A Sd Vflash Card - Dell PowerEdge R630 Owner's Manual

Next steps
1. Follow the procedure listed in
2. Install any device drivers required for the card as described in the documentation for the card.

SD vFlash media card

A vFlash SD card is a Secure Digital (SD) card that plugs into the vFlash SD card slot in the system. It
provides persistent on-demand local storage and a custom deployment environment that allows
automation of server configuration, scripts, and imaging. It emulates USB device(s). For more information,
see the Integrated Dell Remote Access Controller User's Guide at dell.com/esmmanuals.

Replacing a SD vFlash card

Prerequisites
NOTE: This procedure applies only to the 8-hard drive system.
Steps
1. Locate the vFlash media slot on the system.
2. To remove the installed SD vFlash card, push inward on the card to release it and pull the card from
the card slot.
Figure 35. Removing and installing the SD vFlash card
1. SD vFlash card
3. To install the SD vFlash card, with the label side facing up, insert the contact-pin end of the SD card
into the card slot on the module.
NOTE: The slot is keyed to ensure correct insertion of the card.
4. Press inward on the card to lock it into the slot.
86
After working inside your system.
2. SD vFlash card slot