Installing The Front Bezel; Removing The System Cover - Dell PowerEdge R630 Owner's Manual

Installing the front bezel

1. Hook the right end of the bezel onto the chassis.
2. Fit the free end of the bezel onto the system.
3. Secure the bezel with the keylock.

Removing the system cover

Prerequisites
1. Ensure that you read the
2. Turn off the system, including any attached peripherals.
3. Disconnect the system from the electrical outlet and peripherals.
4. Remove the optional bezel. For more information, see
Steps
1. Turn the latch release lock to the unlock position.
2. Lift the cover release latch and remove the system cover.
Figure 15. Removing and installing the system
1. latch release lock
Safety instructions.
Removing the front bezel.
2. system cover
53