Installing The System Cover; Inside The System - Dell PowerEdge R630 Owner's Manual
Hide thumbs
Also See for PowerEdge R630:
- Owner's manual (207 pages) ,
- Technical manual (59 pages) ,
- Installing manual (18 pages)
Table of Contents
Advertisement
3.
latch
Installing the system cover
Prerequisites
Ensure that you read the
Steps
1.
Align the slots on the system cover with the tabs on the chassis.
2.
Press the cover release latch, and push the cover toward the front of the chassis until the latch locks
into place.
3.
Turn the latch release lock clockwise to the locked position.
4.
Install the optional bezel.
5.
Reconnect the system to its electrical outlet and turn the system on, including any attached
peripherals.
Inside the system
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE: Components that are hot-swappable are marked orange and touch points on the
components are marked blue.
54
Safety
instructions.
Advertisement
Table of Contents
Troubleshooting
