Idrac Direct Led Indicator Codes - Dell PowerEdge R630 Owner's Manual

Drive-status indicator pattern (RAID only)
Blinks green, amber, and turns off
Blinks amber four times per second
Blinks green slowly
Steady green
Blinks green three seconds, amber three
seconds, and turns off six seconds

iDRAC Direct LED indicator codes

NOTE: The iDRAC Direct LED indicator does not light up for the USB mode.
Figure 6. iDRAC Direct LED indicator
1. iDRAC Direct status indicator
The following table displays iDRAC Direct activity when configuring iDRAC Direct by using the
management port (USB XML Import).
Table 8. iDRAC Direct LED indicators
Convention iDRAC Direct
LED indicator
pattern
A Green
B Flashing green
18
Condition
NOTE: The drive status indicator remains off until
all hard drives are initialized after the system is
turned on. Drives are not ready for insertion or
removal during this time.
Predicted drive failure
Drive failed
Drive rebuilding
Drive online
Rebuild aborted
Condition
Lights green for a minimum of two seconds at the beginning and
end of a file transfer.
Indicates file transfer or any operation tasks.