Super Io Configuration - ECS NM70-M User Manual

Super IO Configuration

Use this item to show the information of Super IO configuration.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main Advanced Chipset
Super IO Configuration
Super IO Chip
Serial Port 0 Configutation
Serial Port 1 Configuration
Parallel Port Configuration
Version 2.15.1229. Copyright (C) 2012 American Megatrends, Inc.
Super IO Chip (F71869)
This item shows the information of the super IO chip.
Serial Port 0 Configuration
Scroll to this item and press <Enter> to view the following screen:
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main Advanced Chipset
Serial Port 0 Configuration
Serial Port
Device Settings
Change Settings
Version 2.15.1229. Copyright (C) 2012 American Megatrends, Inc.
Serial Port (Enabled)
This item allows you to enable or disable serial port.
Device Settings (IO=3F8h; IRQ=4)
This item shows the information of the device settings.
Change Settings (Auto)
Use this item to change device settings.
Press <Esc> to return to the Super IO Configuration page.
Tweak Boot Security Exit
F71869
Tweak Boot Security
[Enabled]
IO=3F8h; IRQ=4;
[Auto]
NM70-M USER MANUAL
Set Parameters of Serial Port
0 (COMA)
:Select Screen
:Select Item
Enter : Select
+/- : Change Opt.
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Exit
Enabled or Disabled Serial Port
(COM)
:Select Screen
:Select Item
Enter : Select
+/- : Change Opt.
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
39