Pc Health Status - ECS NM70-M User Manual

PC Health Status

On motherboards support hardware monitoring, this item lets you monitor the
parameters for critical voltages, temperatures and fan speeds.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main Advanced Chipset
PC Health Status
Smart Fan Function
CPU Fan Speed
System Fan Speed
CPU Voltage
DIMM Voltage
-=- PECI Mode -=-
Offset to TCC Activation Temp. :
Version 2.15.1229. Copyright (C) 2012 American Megatrends, Inc.
Smart Fan Function
Scroll to this item and press <Enter> to view the following screen:
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main Advanced Chipset
CPU Smart Fan Control
Smart Fan Mode
High Limit Offset (-)
Low Limit Offset (-)
High Limit PWM
Low Limit PWM
System Smart Fan Control
Smart Fan Mode
High Limit Offset (-)
Low Limit Offset (-)
High Limit PWM
Low Limit PWM
Version 2.15.1229. Copyright (C) 2012 American Megatrends, Inc.
CPU/System Smart Fan Control (Enabled)
This item allows you to enable/disable the control of the CPU/System fan speed by
changing the fan voltage.
Smart Fan Mode (Normal)
This item allows you to select the fan mode (Normal, Quiet, Silent, or Manual) for a
better operation environment. If you choose Normal mode, the fan speed will be
auto adjusted depending on the CPU temperature. If you choose Quiet mode, the
fan speed will be auto minimized for quiet environment. If you choose Silent mode,
the fan speed will be auto restricted to make system more quietly. If you choose
Manual mode, the fan speed will be adjust depending on users' parameters.
Press <Esc> to return to the PC Health Status page.
Tweak Boot Security
: 1206 RPM
: 0 RPM
: 0.984 V
: 1.520 V
-40
Tweak Boot Security
[Enabled]
[Normal]
: 30
: 40
: 200
: 58
[Enabled]
[Normal]
: 30
: 40
: 200
: 58
NM70-M USER MANUAL
Exit
:Select Screen
:Select Item
Enter : Select
+/- : Change Opt.
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Exit
:Select Screen
:Select Item
Enter : Select
+/- : Change Opt.
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
31