ECS NM70-M User Manual page 40

Active Processor Cores (All)
This item shows the number of cores to enable in each processor package.
Limit CPUID Maximum (Disabled)
Use this item to enable or disable the maximum CPUID value limit, you can enable
this item to prevent the system from "rebooting" when trying to install Windows NT
4.0.
Excute Disable Bit (Enabled)
This item allows the processor to classify areas in memory by where application
code can execute and where it cannot. When a malicious worm attempts to insert
code in the buffer, the processor disables code execution, preventing damage or
worm propagation. Replacing older computers with Execute Disable Bit enabled
systems can halt worm attacks, reducing the need for virus related repair.
Intel Virtualization Technology (Enabled)
When disabled, a VMM cannot utilize the additional hardware capabilities provided
by Vandor Pool Technology.
EIST (Enabled)
This item allows users to enable or disable the EIST (Enhanced Intel SpeedStep Tech-
nology).
CPU C3 Report (Disabled)
Use this item to enable or disable CPU C3 (ACPI C2) report to OS.
CPU C6 Report (Enabled)
Use this item to enable or disable CPU C6 (ACPI C3) report to OS.
Enhanced Halt (ClE) (Enabled)
Use this item to enable the CPU energy-saving function when the system is not run-
ning.
Configurable TDP (TDP NOMINAL)
Use this item to reconfigure CPU TDP Levels.
Long duration power limit (0)
CPU will use this power limit during the long duration power limit time window.
Long duration maintained (0)
Use this item to control the time window over PL1 value should be maintained.
Short duration power limit (0)
CPU will use this power limit for a very short duration. After that, the long duration
power limit will be honored.
Press <Esc> to return to the Advanced Menu page.
NM70-M USER MANUAL
36