Tweak Menu - ECS NM70-M User Manual

Tweak Menu

This page enables you to set the clock speed and system bus for your system. The
clock speed and system bus are determined by the kind of processor you have
installed in your system.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main Advanced Chipset
Tweak
Auto Detect DIMM/PCI Clk
Spread Spectrum
Intel(R) Celeron(R) CPU 847 @ 1.10GHz
Processor Speed
Memory Frequency
Total Memory
Version 2.15.1229. Copyright (C) 2012 American Megatrends, Inc.
Auto Detect DIMM/PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal of free DIMM/PCI slots.
Spread Spectrum (Enabled)
If you enable spread spetrum, it can significantly reduce the EMI (Electro-Magnetic
Interference) generated by the system.
Intel(R) Celeron(R) CPU 847*@ 1.10GHz
This is display-only field and displays the information of the CPU installed in your
computer.
Processor Speed (1100 MHz)
This item shows the CPU speed.
Memory Frequency (1333 MHz)
This item shows the memory frequency.
Total Memory (2048 MB (DDR3))
This item shows the total memory.
* This picture takes CPU 847 for reference only, please refer to the actual
motherboard as standard.
Tweak Boot Security Exit
[Enabled]
[Enabled]
1100 MHz
1333 MHz
2048 MB (DDR3)
NM70-M USER MANUAL
Auto Detect DIMM/PCI Clock
:Select Screen
:Select Item
Enter : Select
+/- : Change Opt.
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
49