Super Io Configuration - ECS H61H2-M2 User Manual

Super IO Configuration

Use this item to show the information of Super IO configuration.
Main Advanced
Super IO Configuration
Super IO Chip
Serial Port 0 Configutation
Super IO Chip (IT8728)
This item shows the information of the super IO chip.
Serial Port 0 Configuration
Scroll to this item and press <Enter> to view the following screen:
Main Advanced
Serial Port 0 Configuration
Serial Port
Device Settings
Change Settings
Serial Port (Enabled)
This item allows you to enable or disable serial port.
Device Settings (IO=3F 8h; IRQ=4)
This item shows the information of the device settings.
Change Settings (Auto)
Use this item to change device settings.
Press <Esc> to return to the Super IO Configuration page.
Chipset M.I.B III
IT8728
Chipset M.I.B III
Enabled
IO=3F8h; IRQ=4;
Auto
Using BIOS
Boot Security
Set Parameters of Serial
Port 0 (COMA)
: Select Screen
/Click: Select Item
Enter/Dbl Click : Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Boot Security
Enabled or Diabled Serial
Port (COM)
: Select Screen
/Click: Select Item
Enter/Dbl Click : Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
37
Exit
Exit