Setting Jumper Switches - ECS EVEm Series User Manual

Mainboard User's Manual

Setting Jumper Switches

Jumpers are sets of pins which can be connected together with
jumper caps. The jumper caps change the mainboard's operating
way by changing the electronic circuits on the mainboard. If a
jumper cap connects two pins, we say the pins are SHORT. If a
jumper cap is removed from two pins, the pins are OPEN.
JP3
JP11
JBAT1
Jumper JBAT1: Clear CMOS Memory
Use this jumper to clear the contents of the CMOS memory. You
may need to clear the CMOS memory if incorrect settings in the
Setup Utility and preventing your mainboard from operation. To
clear the CMOS memory, disconnect all the power cables from the
mainboard and then move the jumper cap into the CLEAR setting
for a few seconds.
Function
Normal Operation
Clear CMOS Memory
10
Jumper Setting
Short Pins 1-2
Short Pins 2-3
JP5