Install The Mainboard - ECS EVEm Series User Manual

Mainboard User's Manual

Install the Mainboard

Install the mainboard in a system chassis (case). The board is a
micro ATX size mainboard with a twin-tier of I/O ports. Ensure
that your case has an I/O cover plate that matches the ports on this
mainboard.
Install the mainboard in a case. Follow the case manufacturer's
instructions to use hardware and internal mounting points on the
chassis.
Connect the power connector from the power supply to the ATX
connector on the mainboard.
If there is a cooling fan installed in the system chassis, connect the
cable from the cooling fan to the JFAN1 fan power connector on
the mainboard.
Connect the case switches and indicator LEDs to the JP6 switch
and LED connector header. See the illustration right for a guide to
the JP6 connector pin assignments.
1 2
+
+
+
9 10
12
Power Switch Pins 1-2
Reset Switch Pins 3-4
Power LED Pins 5-6
HDD LED Pins 7-8
Suspend LED Pins 9-10
ATX
JFAN1