Pnp/Pci Configurations Page - ECS EVEm Series User Manual

Mainboard User's Manual

PnP/PCI Configurations Page

This page sets some of the parameters for devices installed on the
PCI bus and devices that use the system plug and play capability.
CMOS Setup Utility – Copyright ( C ) 1984—2001 Award Software
PNP OS Installed
Reset Configuration Data
Resources Controlled by
x IRQ Resources
x DMA Resources
PCI/VGA Palette Snoop
↑ ↓ → ← : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General
Help F5: Previous Values F6: BestPerf. Defaults
PNP OS Setting this option to "Yes" allows the PnP OS
Installed (instead of BIOS) to assign the system
resources such as IRQ and I/O address to the
ISA PnP device.
Reset If you enable this item and restart the system,
Configuration any PnP configuration data stored in the BIOS
Data setup is cleared from memory. New updated
data is created.
34
PnP/PCI Configurations
Yes
Disabled
Auto(ESCD)
Press Enter
Press Enter
Disabled
F7: Optimized Defaults
Item Help
Menu Level
Select Yes if you are using
a Plug and Play operating
system Select No if you
need the BIOS to
configure non-boot
devices