Power Management Setup Page - ECS EVEm Series User Manual

Mainboard User's Manual

Power Management Setup Page

This page sets some of the parameters for system power
management operation.
CMOS Setup Utility – Copyright ( C ) 1984—2001 Award Software
ACPI Function
Power Management
PM Control by APM
Video Off Option
Video Off Method
MODEM Use IRQ
Soft-Off by PWRBTN
State After Power Failure
Keyboard Power On
Wake Up Events
↑ ↓ → ← : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General
Help F5: Previous Values F6: BestPerf. Defaults
ACPI Function Use this item to enable or disable the ACPI
function.
Power This item acts like a master switch for the
Management power-saving modes and hard disk timeouts. If
this item is set to Max Saving, power-saving
modes occur after a short timeout. If this item is
set to Min Saving, power-saving modes occur
after a longer timeout. If the item is set to User
Define, you can insert your own timeouts for the
power-saving modes.
PM Control by This field allows you to control the PC
APM Monitor's power management features via Intel-
Microsoft Advanced Power Management
software. Once you have enabled the APM
interface, some settings made in the BIOS Setup
program may be overridden by APM.
32
Power Management Setup
Disabled
Press Enter
Yes
Suspend --> Off
Blank Screen
3
Delay 4 Sec
Off
Disabled
Press Enter
F7: Optimized Defaults
Item Help
Menu Level