Table of Contents
Advertisement
Frequency/Voltage Control Page
This page sets some of the parameters for frequency and voltage
control.
CMOS Setup Utility – Copyright ( C ) 1984—2001 Award Software
Auto Detect DIMM/PCI Clk
Spread Spectrum
↑ ↓ → ← : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General
Help F5: Previous Values F6: BestPerf. Defaults
Auto Detect
When this item is enabled, BIOS will disabled
DIMM/PCI Clk
the clock signal of free DIMM and PCI slots.
Use this item to set the system bus spread
Spread Spectrum
spectrum for the installed processor.
Load BestPerf. Defaults
If you select this item and press Enter a dialog box appears. If you
press Y, and then Enter, the Setup Utility loads a set of best-
performance default values. These defaults are quite demanding
and your system might not function properly if you are using
slower memory chips or other low-performance components.
3: BIOS Setup Utility
Frequency/Voltage Control
Enabled
Disabled
F7: Optimized Defaults
Item Help
Menu Level
37
Advertisement
Table of Contents
