Eternus Jx40 Disk Storage System - Fujitsu SE700 Operating Manual

ETERNUS JX40 disk storage system

4.1 ETERNUS JX40 disk storage system
ETERNUS JX40 disk storage systems with an SAS port can be integrated into the SE
server when required:
– Up to two systems can be connected to an SU300.
– On an AU up to two systems can be connected to one controller.
In the rack, an ETERNUS JX40 disk storage subsystem occupies two height units.
Per disk storage system up to 24 drives each with a gross capacity of 1200 GB can be
employed. This means that an ETERNUS JX40 disk storage system enables up to 28.8 TB
of disk storage space to be provided. When mirroring is used, the net capacity of the disks
is lower.
For details, please refer to the description of FUJITSU at http://www.fujitsu.com/uk:
Select Computing Products → Storage → ETERNUS JX→ ETERNUS JX40.
Ê
The disk storage system is switched on/off automatically when the SU x86 or AU is
switched on/off.
Figure 9: ETERNUS JX40 disk storage system
The numbering of the various hard disk drives is shown by the numbers (0..23) below them.
28
Periphery
U41861-J-Z126-1-76