Application Unit Au47 - Fujitsu SE700 Operating Manual

Application Unit

2.1 Application Unit AU47

AU47s are set up on the same system unit as the PRIMERGY servers RX4770 M<x> and
use the same system board. Differences in the basic units exist to permit integration of the
Application Units into the SE server and to enhance the SE server's redundancy features.
In the event of questions, e.g. regarding application compatibility, the information for the
PRIMERGY servers RX4770 M<x> also applies for the Application Units of the SE server.
Security functions in the BIOS setup and on the system board protect the data against
manipulation. Information on the security functions in the BIOS is provided in the "D3342
BIOS Setup Utility for FUJITSU Server PRIMERGY RX4770 M1"
(http://manuals.ts.fujitsu.com
i
Features
Application Units contain two or four Intel XEON processors, have a storage capacity of up
to 6 TB and offer ten PCI express slots.
Detailed information on the various hardware components and interfaces of the Application
Units is provided in the data sheet "FUJITSU Server BS2000 SE Series". See the product
site for the relevant server at http://www.fujitsu.com/uk:
Go to Products → Servers → BS2000 → FUJITSU Server BS2000 and select SE700,
Ê
SE500 or SE300.
U41861-J-Z126-1-76
under the heading Industry standard servers).
At present the current model of the PRIMERGY server RX4770 M1 provides the
hardware basis for AU47. When an innovation of the PRIMERGY server takes
place in future, the newer variants will be released as the hardware basis for AU47,
e.g. an RX4770 M2.
Application Unit AU47
9