Date And Time - Hawking HW12ACM User Manual

4-4-2. Date and Time

and time of the device can be configured manually or can be synchronized with a time server.
Date and Time Settings
Local Time
Acquire Current Time
from your PC
NTP Time Server
Use NTP
Server Name
Update Interval
64
You can configure the time zone settings of your access point here. The date
Set the access point's date and time manually using the drop
down menus.
Click "Acquire Current Time from Your PC" to enter the required
values automatically according to your computer's current time
and date.
The access point also supports NTP (Network Time Protocol) for
automatic time and date setup.
Enter the host name or IP address of the time server if you wish.
Specify a frequency (in hours) for the access point to
update/synchronize with the NTP server.